EPPCO ULTRA BRAKE FLUID is a high-quality synthetic brake and clutch fluid conforming to the DOT4 specification and based on polyglycol type fluid that is high performance standard used in worldwide automotive brake equipment.
Applications
- Suitable for passenger cars, trucks and buses that require DOT 4 synthetic brake fluid.
- High performance cars.
Benefits
- Very High wet boiling point.
- Excellent low-temperature stability.
- High temperature viscosity performance.
- Excellent corrosion protection.
- Compatibility with different rubber seals.
- Excellent thermal stability in high performance braking conditions.
Performance Standards
ULTRA BRAKE FLUID meets and exceeds the following International specifications:
FMVSS 116 DOT 4
SAE J-1703
ISO 4925 and NFR 12640.
Always follow equipment manufacturer’s recommendation for required brake fluid performance level.
Cautionary Note
ULTRA BRAKE FLUID should not be used where a mineral type fluid is specified (e.g.Citroen).
Compatibility
ULTRA BRAKE FLUID is compatible with other DOT 4, SAE 1703 fluids and may be added as make-up fluid. It can be used throughout mixed fleets thereby avoiding the need to order stock and use a special fluid for different brake systems.
Technical Data*
| Density g/cm³ | 1.067 |
| Wet Boiling Point, °C min | 155 |
| Dry Boiling Point, °C min | 230 |
| Viscosity mm²/s @ 40°C | 1500 |
| Viscosity mm²/s @ 100°C | 1.5 |
| Flash Point PMCC °C | 125 |
| Product Code | 323002 |
| Product Safety Sheet | Available Upon Request |
-
Overview Applications
- Suitable for passenger cars, trucks and buses that require DOT 4 synthetic brake fluid.
- High performance cars.
Benefits- Very High wet boiling point.
- Excellent low-temperature stability.
- High temperature viscosity performance.
- Excellent corrosion protection.
- Compatibility with different rubber seals.
- Excellent thermal stability in high performance braking conditions.
Performance StandardsULTRA BRAKE FLUID meets and exceeds the following International specifications:
FMVSS 116 DOT 4
SAE J-1703
ISO 4925 and NFR 12640.Always follow equipment manufacturer’s recommendation for required brake fluid performance level.
Cautionary NoteULTRA BRAKE FLUID should not be used where a mineral type fluid is specified (e.g.Citroen).
CompatibilityULTRA BRAKE FLUID is compatible with other DOT 4, SAE 1703 fluids and may be added as make-up fluid. It can be used throughout mixed fleets thereby avoiding the need to order stock and use a special fluid for different brake systems.
-
Properties and SpecificationTechnical Data*
Density g/cm³ 1.067 Wet Boiling Point, °C min 155 Dry Boiling Point, °C min 230 Viscosity mm²/s @ 40°C 1500 Viscosity mm²/s @ 100°C 1.5 Flash Point PMCC °C 125 Product Code 323002 Product Safety Sheet Available Upon Request
