EPPCO BENZYNA 2T is an economical quality two-stroke engine oil that has been developed for small to medium size air-cooled two-stroke engines used in motor-cycles, scooters and three- wheeler light passenger vehicles. Formulated with a modern low ash additive system which offers protection against scuffing of piston rings and liner wear by minimizing piston ring deposits.
Applications
- All modern and older model two-stroke engines.
- Three-wheeler light passenger vehicles powered by two-stroke engine.
- Chainsaws and in portable equipment powered by two-stroke engine.
Benefits
- Control of engine deposits to prevent pre-ignition
- Consistent power output
- Supports acceptable engine service life
Mix BENZYNA 2T with petrol
BENZYNA 2T mixes readily with petrol as a "premix" and is equally suitable for metered lube injection systems. The best advise on mixing is to:
- Fill the tank half with petrol
- Pour in the correct amount of oil
- Add the remainder of petrol
- Follow the manufacturers’ recommendations for mixing oil to petrol ratios.
Performance Standards
BNEZYNA 2T meets the following International specification:
API TA
Always follow equipment manufacturer’s recommendation for required lubricant performance levels.
Technical Data*
| Kinematic Viscosity mm²/s @ 40°C | 58 |
| Kinematic Viscosity mm²/s @ 100°C | 8.2 |
| Flash Point, PMCC, °C | 112 |
| Sulphated Ash %m | 0.04 |
| Pour Point, °C | -18 |
| Product Code | 320005 |
| Product Safety Sheet | Available Upon Request |
-
Overview Applications
- All modern and older model two-stroke engines.
- Three-wheeler light passenger vehicles powered by two-stroke engine.
- Chainsaws and in portable equipment powered by two-stroke engine.
Benefits- Control of engine deposits to prevent pre-ignition
- Consistent power output
- Supports acceptable engine service life
Mix BENZYNA 2T with petrol
BENZYNA 2T mixes readily with petrol as a "premix" and is equally suitable for metered lube injection systems. The best advise on mixing is to:
- Fill the tank half with petrol
- Pour in the correct amount of oil
- Add the remainder of petrol
- Follow the manufacturers’ recommendations for mixing oil to petrol ratios.
Performance StandardsBNEZYNA 2T meets the following International specification:
API TA
Always follow equipment manufacturer’s recommendation for required lubricant performance levels.
-
Properties and SpecificationTechnical Data*
Kinematic Viscosity mm²/s @ 40°C 58 Kinematic Viscosity mm²/s @ 100°C 8.2 Flash Point, PMCC, °C 112 Sulphated Ash %m 0.04 Pour Point, °C -18 Product Code 320005 Product Safety Sheet Available Upon Request
