EPPCO ADVANCED 880X 15W-40 is advanced heavy duty diesel engine oil for low emission engines operating on high temperature using low Sulphur fuel and fitted with exhaust after treatment devices such as Three-Way Catalyst (TWC), Diesel particulate filters (DPF), Selective Catalyst Reduction (SCR), Diesel Particulates & Nitrous-oxide Reduction(DPNR), Exhaust Gas Recirculation(EGR). It is available in SAE 15W-40 viscosity grade. Formulated to provide excellent engine piston deposit control.
Advanced heavy duty diesel engine oil for low emission engines operating on high temperature
Applications
- Heavy duty Diesel Vehicles fitted with state-of-the art exhaust after treatment system such as particulate filters, EGR and catalytic converters that meets low emission requirements EURO IV & V
- Off-road construction equipment
- Light duty diesel passenger cars & pickups.
- Suitable for both turbocharged and naturally aspirated diesel engines
Benefits
- Protection to Exhaust After Treatment Devices such as Three Way Catalyst (TWC), Diesel particulate filters (DPF), Selective Catalyst Reduction (SCR), Diesel Particulates & Nitrous-oxide Reduction(DPNR), Exhaust Gas Recirculation(EGR) thus suitable for low emission engines
- Superior resistance to oil thickening/sludge formation, outstanding deposit control and improve engine life
- Helps support standard oil drain interval and oil consumption control
- Excellent protection against wear
- Excellent low temperature easy starting, so termed as all weather oil
Performance Standards
ADVANCED 880X 15W-40 is formulated with additive technology that has been tested to meet the requirements of following OEM and International specifications requirements:
API CJ4/SN, ACEA E9,
Also suitable for equipment calling for MB-Approval 228.31, MTU Type 2.1, Caterpillar ECF-3, Volvo VDS 4, MAN M3575 specifications.
Always follow equipment manufacturer’s recommendations for required lubricant performance level and oil drain intervals.
Technical Data*
| SAE Grade | 15W 40 |
| Density kg/m³ | 0.856 |
| Kinematic Viscosity mm²/s @ 40°C | 106.2 |
| Kinematic Viscosity mm²/s @ 100°C | 14.74 |
| Viscosity Index | 143 |
| TBN mg KOH/g | 8.0 |
| Flash Point, COC | 234 |
| Pour Point, °C | -36 |
| Product Code | 300040 |
| Product Safety Sheet | Available Upon Request |
-
Overview Applications
- Heavy duty Diesel Vehicles fitted with state-of-the art exhaust after treatment system such as particulate filters, EGR and catalytic converters that meets low emission requirements EURO IV & V
- Off-road construction equipment
- Light duty diesel passenger cars & pickups.
- Suitable for both turbocharged and naturally aspirated diesel engines
Benefits- Protection to Exhaust After Treatment Devices such as Three Way Catalyst (TWC), Diesel particulate filters (DPF), Selective Catalyst Reduction (SCR), Diesel Particulates & Nitrous-oxide Reduction(DPNR), Exhaust Gas Recirculation(EGR) thus suitable for low emission engines
- Superior resistance to oil thickening/sludge formation, outstanding deposit control and improve engine life
- Helps support standard oil drain interval and oil consumption control
- Excellent protection against wear
- Excellent low temperature easy starting, so termed as all weather oil
Performance StandardsADVANCED 880X 15W-40 is formulated with additive technology that has been tested to meet the requirements of following OEM and International specifications requirements:
API CJ4/SN, ACEA E9,
Also suitable for equipment calling for MB-Approval 228.31, MTU Type 2.1, Caterpillar ECF-3, Volvo VDS 4, MAN M3575 specifications.
Always follow equipment manufacturer’s recommendations for required lubricant performance level and oil drain intervals.
-
Properties and SpecificationTechnical Data*
SAE Grade 15W 40 Density kg/m³ 0.856 Kinematic Viscosity mm²/s @ 40°C 106.2 Kinematic Viscosity mm²/s @ 100°C 14.74 Viscosity Index 143 TBN mg KOH/g 8.0 Flash Point, COC 234 Pour Point, °C -36 Product Code 300040 Product Safety Sheet Available Upon Request
